IMPORTANT:
It is advised to shorten the IR LED ring’s wire to
approximately 20 cm for it to fit inside the PoE converter.
3. Plug one of the PoE converter’s terminal blocks to the camera and the
other one to the IR LED ring.
4. Secure the camera to the PoE converter with the supplied screws.
5. Secure the PoE converter to the ceiling with 3 self-prepared screws.
20cm
Installation
Without IR LED Ring
With IR LED Ring
To install GV-Fisheye Camera with PoE converter (GV-FE3403 /
5303), drill the 3 holes and the rectangle block indicated as “PoE
Converter”.
Hard Ceiling Mount
2
1
Place the installation sticker on the ceiling board. The 3 red dots
indicate the location of the screws.
Device
TOP
Device
Device
PoE Converter
PoE Converter
PoE Converter
PoE Converter
IR
