GeoVision GV-EFER3700 Series, Руководство пользователя, Страница: 74 / 208

60
2.1.2 Assigning an IP Address
By default, GV-Fisheye Camera that is connected to LAN without a DHCP server, is
assigned with the static IP address
192.168.0.10 . Follow the steps below to assign a
new IP address to avoid IP conflict with other GeoVision devices.
Note:
1. The computer used to set the IP address must be under the same network with the
camera.
2. If your router supports the DHCP server, the camera will obtain a dynamic IP
address from the DHCP server each time it connects to the LAN, instead of using
192.168.0.10. The default setting for automatic IP assignment is not available for
GV-FE2301 / 4301 using firmware V1.06 or earlier.
1. Open your web browser, and type the default IP address 2. Type the default value
admin . Click Apply .
3. In the left menu, select Network and then LAN to begin the network settings.
Figure 2-2
4. Select Static IP address . Type IP Address, Subnet Mask, Router/Gateway, Primary DNS
and Secondary DNS in the Configure connection parameters section.
5. Click Apply . The camera is now accessible by entering the assigned IP address on the
Web browser.