GeoVision GV-EFER3700 Series Скачать руководство пользователя страница 11

Страница: 11 / 208

Note for Connecting to GV-DVR /
NVR / VMS

The GV-Fisheye IP Camera is designed to work with GV-DVR / NVR / VMS, a video

management system. Note the following when the camera is connected to GV-DVR / NVR /

VMS:

1. By default, the images are recorded to the memory card inserted in the GV-Fisheye IP

Camera.

2. Once the camera is connected to the GV-DVR / NVR / VMS, the resolution set on the

GV-DVR / NVR / VMS will override the resolution set on the camera’s Web interface. You

can only change the resolution settings through the Web interface when the connection

to the GV-DVR / NVR / VMS is interrupted.

Note for USB Storage and WiFi Adapter

Mind the following limitations and requirements for using USB storage and GV-WiFi Adapter:

1. The USB hard drive must be of 2.5’’ or 3.5’’, version 2.0 or above.

2. The USB hard drive’s storage capacity must not exceed 2TB.

3. USB flash drives and USB hubs are not supported.

4. External power supply is required for the USB hard drive.

5. To connect a GV-WiFi Adapter, make sure it is connected before the camera is powered

on.

Содержание GV-EFER3700 Series

















































































































































































































Результаты поиска

Содержание GV-EFER3700 Series

Отзывы:

GeoVision GV-EFER3700 Series, Руководство пользователя, Страница: 11 / 208

Результаты поиска

Содержание GV-EFER3700 Series

Отзывы: