GeoVision GV-EFER3700 Series Скачать руководство пользователя страница 69

Страница: 69 / 208

Introduction

1.7.5 GV-FER5700 / 5701 / 12203

GV-FER5700 / 5701 / 12203 comes with a data cable that allows you to connect to the

power adapter, WiFi adapter or USB hard drive, microphone, speaker, and any I/O devices.

Figure 1-68

Note:

AC 24V is not supported by GV-FER5700 / 5701.

GV-FER12203 currently does not support GV-WiFi Adapter V2.

Connecting to Power

There are two ways to supply power to the camera:



Use a Power over Ethernet (PoE) adapter to connect the camera to the network, and

the power will be provided at the same time.



Plug the power adapter to the terminal block on the data cable.

Connecting to I/O Devices

For details, see the same topic in

1.7.6 GV-EFER3700 / EFER3700-W

Содержание GV-EFER3700 Series

















































































































































































































Результаты поиска

Содержание GV-EFER3700 Series

Отзывы:

GeoVision GV-EFER3700 Series, Руководство пользователя, Страница: 69 / 208

Результаты поиска

Содержание GV-EFER3700 Series

Отзывы: