GeoVision GV-EFER3700 Series, Руководство пользователя, Страница: 64 / 208

50
1.7.2 GV-FE3402 / 3403 / 5302 / 5303
Figure 1-59
1. Remove the camera cover with the supplied torx wrench.
2. Supply power and network to the camera with one of the following methods:
A. Power adapter: plug in the power adapter and connect a standard network work
cable.
B. Power over Ethernet (PoE): connect the camera to a PoE switch with a standard
network cable to supply power and network.
C. PoE Converter: this method is only applicable to indoor GV-Fisheye Camera
installed with an IR LED ring (GV-FE3403 / 5303). A PoE converter allows the
camera to be connected to a PoE switch (thus supplied with network and power
over a network cable), and also supplies power to IR LED ring. For installation
steps, see 1.7.4 Connecting PoE Converter and IR LED Ring for GV-FE3403 /
5303 .
3. Optionally insert a micro SD card (SD/SDHC, version 2.0 only, Class 10).
4. Optionally connect an external speaker.
5. Optionally connect a GV-WiFi Adapter (for WiFi accessibility) or an external USB hard
drive (for additional storage).
6. Secure the camera cover with the supplied torx wrench.
Note: For details on the limitations and requirements of mini USB port, refer to Note for
USB Storage and WiFi Adapter at the beginning of this manual.