GV-QR1352 / DES1352
14
1
1. Run the setup AP.
2. Select the COM port that is connected to the reader and click
Open COM
. The red
square next to the COM port box should change to blue to indicate the COM port is
correct.
3. By default, the beeper is enabled on the reader. To change the reader’s reaction upon
being approached, deselect/select
Beeper
,
Green LED
and/or
Red LED
. For example, if
you select both Beeper and Green LED, when the reader is approached, it will beep
together with a flashing green LED.
4. Only for a RS-485 reader, select an
ID number
for the reader. The ID number ranges
from 0 to 7.
5. Click
Setup
. The settings are sent to the reader.
6. Connect another reader to the computer, and follow the instructions above for setup.