GV-QR1352 / DES1352
8
1
1.4 Installation
1. Pull the terminal cables from the square holes of the mounting plate
B
.
2. Secure
B
onto the wall with self-prepared Flat Head Cap Philips Tapping Screws.
For users of US gang boxes, mount
B
with the heightening mount bracket before the
following steps.
3. Connect the cables to the backside of the body
C
, and attach
C
to
B
at lower position of
B
. Push
C
up to make both hooked completely.
4. Use the supplied Allen key and 2 screws to assemble the body
C
onto the mounting
plate
B
.
5. Attached the supplied back cover
D
to
C
.
6. Once the reader is powered on, its beeper will sound. Wait for the reader to start for 10
sec.