GeoVision GV-BX1200 Series, Быстрый старт

Страница: 191 / 282

4. Thread audio wires (optional) into the camera.
A. Rotate to remove the cap of the conduit connector.
B. Take out and disintegrate the connector. You should have 3 parts
too.
C. Thread the audio wires from the back panel, remove the plugs of
part 1 and thread through the 3 parts of the connector.
Plug
D. Re-install the cap (part 3) with the supplied small concave
hexagon wrench. Make sure the cap is installed tightly to
waterproof the camera.
156