Administrator Mode
87
7
Before enabling the following DDNS function, the Administrator should
have applied for a Host Name from the DDNS service provider’s website.
There are 2 providers listed in the camera: GeoVision DDNS Server and
DynDNS.org.
To enable the DDNS function:
1.
Enable:
Enable the DDNS function.
2.
Service Provider:
Select the DDNS service provider you have
registered with.
3.
Host Name:
Type the host name used to link to the camera. For the
users of GeoVision DDNS Server, it is unnecessary to fill the field
because the host name will be detected and brought up automatically.
4.
User Name:
Type the username used to enable the service from the
DDNS.
5.
Password:
Type the password used to enable the service from the
DDNS.
6. Click
Apply
.
[HTTP Port Settings]
The HTTP port enables connecting the camera to
the web. For security integration, the Administrator can hide the server
from the general HTTP port by changing the default HTTP port of 80 to a
different port number within the range of 1024 through 65535.
[GV-IPCAM Streaming Port Settings]
The VSS port enables connecting
the camera to the GV-System. The default setting is 10000.
[UPnP Settings]
UPnP (Universal Plug & Play) is a networking
architecture that provides compatibility among networking equipment,
software and peripherals of the 400+ vendors that are part of the Universal
Plug and Play Forum. It means that they are listed in the network devices
table for the operating system (such as Windows XP) supported by this
function. Enabling this function, you can connect to the camera directly by
clicking on the camera listed in the network devices table.
Содержание GV-BX110D
Страница 37: ...28 3 Fasten the philips head screws with the plastic screw spacers Figure 4 21 ...
Страница 61: ...52 7 1 1 Video Settings Figure 7 2 ...
Страница 89: ...80 Camera Status Icon On standby Enabled for motion detection and input trigger ...
Страница 107: ...98 4 Click Query The filtering results may look like the figure below Figure 7 34 ...
