GeoVision GV-BX110D, Руководство пользователя

Страница: 72 / 175

Administrator Mode
63
7
7.2 Digital I/O Settings
Note the I/O function is only available for Box Camera and Bullet Camera .
The I/O terminal block of Box Camera and the I/O wires of Bullet Camera
provide the interface for one external alarm and sensor device. For details
on the I/O interface, see
2.7 I/O Terminal Block or 4.2.1 Connecting to the
Data Cable.
7.2.1 Input Settings
To activate the sensor input, select Enable .
Figure 7-10
„
Normal State: You can set the input state to trigger actions by
selecting Open Circuit (N/O) or Grounded Circuit (N/C) .
„
Latch Mode: Enable this option to have a momentary output alarm.
„
Trigger digital output relay: When this option is enabled, the output
will be triggered once the input is activated.
„
Record: Enable this option to start recording when the input is
triggered.
„
Send Video to Center V2: Enable this option to send the images to
Center V2 when the input is triggered.