26
V1.0 September 2017
STEP 7
-
Connect a length of safety
rope to the bottom wheel assembly
using the loop provided.
Shown here is the rope passing through
the plastic cable clip, for neatness, but
this is not essential.
STEP 8
-
Carefully lower the bottom
wheel assembly and the IPI sensor into
the inclinometer casing.
Ensure that the installation fork is
available to be used.
Consequently, the
‘
sprung
’
wheel should
be located in the keyway in the
inclinometer casing
opposite
to the
direction of expected movement.
STEP 9
-
Continue to lower the
assembly into the casing
The
‘
fixed
’
wheel
should be located in the keyway
in the direction of the expected
of movement
5.5 Installation with wire rope contd...
