15
V1.0 September 2017
5.3.Installation with extension rods
contd
….
STEP 4
-
Offer the two sides of the
connector together, aligning the positions
of the locating pin and socket
STEP 5
-
Push the two halves of the joint
together until the threads meet
STEP 6
-
Rotate the threaded locking
ring
until the locking spring clip
‘
snaps
’
into place.
It is not necessary to tighten further
(Continued from page 14)
Note the corresponding
locating pin in the
‘
Female
’
end of the interconnection
on the IPI sensor
If the connections needs to be undone the safety clip should be
undone using a screwdriver or similar tool
