AKULA 9000B USER MANUAL
/ SECTION 1
REV:EN05130513-03
Copyright 2006-2015 © Geoscanners AB
7
1.1
Recharging the Battery
• You should always use the charger* provided in the package to
charge your units battery.
• in case of malfunction of the charger or battery life end, please
contact Geoscanners AB for advice on selecting the appropriate
substitute.
• Connect the battery to the charger and make sure it is firmly
attached.
• The charger is now ready to start the automatic maintenance of
the connected battery.
• The red LED lights up when the charger* is charging the battery
and the green LED lights up when the battery is fully charged.
• The charging of the battery is dependent on the battery capacity
and its power level.
• For the first time charging please allow a minimum of 24 hours
for the battery to get fully charged.
*The provided charger may differ from the one in the picture depending on the system distribution package.
1. Charger and battery
2. Connect the battery to the charger
3. Recharge the battery
