GEOSATpro DSR-R100 Series, Руководство пользователя

Страница: 27 / 33

www.GeoSatpro.com Toll Free 888-483-4673
25
The easiest way to aim the satellite dish is to temporarily place the
satellite receiver connected to a small television at the dish antenna
mounting location.
CAUTION: DO NOT ATTEMPT TO OPERATE
ELECTRONIC DEVICES IN AN UNSAFE
LOCATION OR IN VIOLATION OF SAFEGUARDS
PROVIDED IN THIS MANUAL OR ANY OTHER
EQUIPMENT MANUAL PROVIDED WITH THIS
SATELLITE SYSTEM.
Remove the satellite receiver and remote control from the packaging.
Inspect the unit before operation. If any equipment is damaged or if
you have any questions, please immediately contact your reseller.
Install the two included AAA batteries into the remote control battery
compartment..
Plug the satellite receiver’s AC power plug into the same power
strip. The receiver will power on with a display “ boot ” and the TV
screen will display a Language Selection Screen.
Connect the satellite receiver
to the TV. The most basic
connection is to connect
the include AV RCA cables
from the satellite receiver
to a monitor or TV. Plug the
television power plug into a
surge protected power strip.
Turn the TV/Monitor power on
and set the TV to AV Input. The
TV/Monitor is now set-up to
view the satellite receiver.
Connect Receiver to a TV