GEOSATpro DSR-R100 Series, Руководство пользователя

Страница: 17 / 33

www.GeoSatpro.com Toll Free 888-483-4673
15
Receiver Menu Items Main Page
Press MENU button and five Sub Menus will be
displayed on screen
I. Installation
II. Channel Manager
III. Preferences
IV. Game
I. Installation
This section will assist in configuring the receiver to receive signals from the dish, control
switches and enable a motorized dish. Scan for channels using Blind Scan, or using pre
programmed transponders. Manually add, delete or edit transponders.
I-1. Antenna Settings
I-2. Automatic Search
I-3. Manual Search
I-1. Antenna Settings
Highlight Antenna Settings. Press OK. If requested,
enter Password (default 0000)
1.
Satellite
- Select the proper satellite. Press OK to
place a check mark beside the satellite
- Press navigation right arrow to modify
2. LNB Type
- Press OK to display list of LNB
types, Universal, Standard, OCS C-band,
WideBand.
- Select the proper LNB Type. Press OK
3. Frequency (LNB LO)
- Press OK to display list of LNB LO
- Select the proper LNB LO. Press OK
4. Transponder
- Press OK to display list of transponders
- Select an active transponder. Press OK
5. DiSEqC Switch Setting
- Press OK to display list of switch ports
- Select the correct switch port. Press OK
6. 22KHz
may be unavailable with LNB LO Type
- Press OK to display list ON / OFF
- Select the proper setting. Press OK
I-4. Blind Search
I-5. Motor Setting
I-6. Factory Default