GEOSATpro DSR-R100 Series, Руководство пользователя

Страница: 21 / 33

www.GeoSatpro.com Toll Free 888-483-4673
19
All DiSEqC 1.2 saved satellite motor positions can be
globally shifted or offset with RECALCULATE ALL
POSITION command.
Drive the motor to the zero position with GOTO
REFERENCE.
When using DiSEqC 1.2 mode or if the motor might drive
the dish into an object, set East and West electronic limits
to prevent damage to the motor and/or dish.
- Select MOVE in the DiSEqC 1.2 menu
- While observing the dish, press the
navigation right arrow button and drive the
Dish to the East Limit
- Select LIMIT SETTING. Press OK
- Select EAST LIMIT, Press OK
- Press the EXIT button
- Select MOVE in the DiSEqC 1.2 menu
- While observing the dish, press the
navigation left arrow button and drive the
Dish to the East Limit
- Select LIMIT SETTING. Press OK
- Select WEST LIMIT, Press OK
- Press the EXIT button
East and West electronic limits have been set.
I-6. Factory Default
All user data can be erased and reset back to factory
installed settings.
Highlight Factory Default. Press OK. If requested, enter
Password (default 0000).
- When Prompted “ Are you sure to use default
configure?” Select Yes
- Press OK to erase all data and reset to the
factory set defaults.
Warning: This will erase all user data and settings! There
is no data recover mode to retrieve this information.