George Foreman GFBL4000AU, Инструкции и гарантия

Страница: 6 / 28

6
IMPORTANT: Do not hold speed or pulse buttons down when blending. If held for
longer than 30 seconds the unit will automatically power-off. Unplug the unit to
reset.
• When finished press STOP to stop blending or ON/OFF to switch the unit off.
• To remove the jug, grasp the handle and lift up.
• Lift open the pouring tab and pour contents out.
• Always switch off and disconnect the appliance from the wall power outlet when not in
use.
PREPARE THE BLASTOMATIC FOR USE
The Blastomatic is perfect for green smoothies, frozen fruit smoothies, ice based drinks,
salsas and creations containing nuts and seeds
NOTE: Prior to use, the Blastomatic bottle should be dismantled and washed as
instructed in the CARE AND CLEANING section on page 8 of this manual. Following
cleaning:
• Place the Blastomatic bottle on a flat surface with the open end facing up.
CAUTION: Never blend dry goods alone in the bottle (always add liquid) and ensure
ingredients are at room temperature or below.
For best results, add ingredients in the following order:
a. Liquids
b. Ice
c. Hard Foods
d. Soft Foods
e. Powders
CAUTION: Handle the sharp Blastomatic blade assembly with care.
• Fasten the Blastomatic blade assembly on to the open end of the bottle and turn it
clockwise until it is tight.
• Sit the motor unit on a stable, level, dry surface.
• Turn the Blastomatic upside down and place on the blender base, turning clockwise to
lock into place.
CAUTION: Hold the bottle!
NOTE: Before starting the motor, place and leave your hand on top of the bottle to
prevent the possibility of it being dislodged by the sudden movement of ingredients
when the motor starts.
• Select the appropriate speed or program or use PULSE to blend to desired
consistency. The Blastomatic attachment is optimised for green smoothies, frozen fruit
smoothies, ice based drinks, salsas and creations containing nuts and seeds.
CAUTION: Wait until the blades come to a complete stop before proceeding any
further.
• Once blending has finished, remove the Blastomatic by turning counter-clockwise and
lifting off the base. Turn the Blastomatic over and place it on a flat surface with the
blade assembly end facing upwards.