Georator Triathlon III T3UPS-13-15K, Инструкция по эксплуатации

Страница: 82 / 98

AUTO-DIALING MODULE
－
UPSCALL
TM
In case abnormal situations occur, the UPSCALL
TM
automatically dials
specified phone numbers to inform emergency personnel to take prompt action.
The module comes with built-in 23A12V battery, so as to be operated under
AC source failure. The unit consumes power only when in the process of
dialing. Furthermore, by using auto-dialing technology and multiple phone
number settings, UPSCALL
TM
has no need of dedicated telephone lines. It
offers the user a prompt and convenient way for monitoring the UPS.
(A) Module Contents
RECEIVING MASTER DIALING UNIT EEPROM BOARD
1. RECEIVING MASTER
On the front panel of the Receiving Master (see photo above), there are
three keys (UP
↑∕
DOWN
↓∕
ENTER
←┘
) and two LEDs. The green
LED lights for power ON, and the red LED lights, with an audible alarm,
when data is being received.
To make the display sharp and readable, the LCD is backlit by LEDs. To
prolong the life of the backlighting LEDs, the CPU will cut off power to the
LEDs 15 seconds after the last key stroke of UP
↑∕
DOWN
↓∕
ENTER
←
┘
key is pressed. Backlighting will resume when the UP, DOWN or ENTER
key is pressed.
One RECEIVING MASTER can connect more than one DIALING UNIT.
2. DIALING UNIT
On the front cover of the Dialing Unit (see photo above), there are two
LEDs and one black test key. The green LED lights for power ON and to
trigger dialing. The yellow LED lights when the call is successfully
connected and data is in transit. The black test key is used to do activate a
test dialing sequence after installation.
1