Geonics Limited EM61MK2A Скачать руководство пользователя страница 35

Страница: 35 / 62

EM61MK2 Data Logging System (DAS70/61MK2)

Station, direction of the Station Increment, and Direction are determined based on Sequence

selection. All these parameters can be overwritten by the user as described in the Survey

Setup menu description (section 10.2).
After selection is updated, it can be accepted by pressing the function key

. The display

returns to the Log Data screen with new settings for the new survey line.
Pressing key

or <

Esc

> will disregard any New Line menu changes and the program

will return to the Log Data screen and measurements can be continued.

(New Station)

This option is labeled

NStn

in the Text display mode, and

in the Graphic display mode.

The New Station menus in two display modes, in the text mode (on the left) and in the

graphic mode (on the right) are given below.

Selecting this option allows the operator to enter a new station number. In the Text mode

Start Station and Current Stations are displayed at the top of the screen. In the Graphic

mode only the Current Station is displayed. The New Station can be entered in the similar

way as editing parameters in Survey Setup menu, and in the provided message box in the

Graphic display mode.
After the New Station is entered, it can be accepted by pressing the function key

. The

display return to the Log Data screen with new station..
Pressing key

or <

Esc

> will disregard new entry and the program will return to the Log

Data screen and measurements can be continued.

(Comment)

This option is labeled

Cmnt

in the Text display mode, and

in the Graphic display mode.

Menus containing Enter Comment box in the text mode (on the left) and in the graphic

mode (on the right) are given below.

Содержание EM61MK2A































































Результаты поиска

Содержание EM61MK2A

Отзывы:

Бренды по названию

Популярные бренды

Geonics Limited EM61MK2A, Руководство по эксплуатации

Результаты поиска

Содержание EM61MK2A

Отзывы:

Бренды по названию

Популярные бренды