manualshive.com logo in svg

Geonics Limited EM61MK2A, Руководство по эксплуатации

Поделиться
Скачать
Geonics Limited EM61MK2A Скачать руководство пользователя страница 33

29

EM61MK2 Data Logging System (DAS70/61MK2)

GPS reading is written to the data file. In the text mode number of  GPS positions follows label

DGPS

 (or 

AGPS

 positions are not differentially corrected), the corresponding label in graphic

mode is 

D

 (or 

A

). Small square moving up and down in Stand By mode indicates that the GPS

system is monitored and it is working. Two other GPS parameters: PDOP (represented by label 

P

)

and Number of  Tracked Satellites (label 

S

) are updated continuously in Stand By mode.

Several available field options are listed at the bottom of  the Stand By mode screen. They will be

described in the following section 12.5.

Logging Mode

The Logging mode is enabled by pressing the <

ENTER

> key, which corresponds to label 

Start

 in

the Text Display, and 

GO

 in the Graphic display mode. After this key is pressed the bottom portion

of  the screen will change and data will be logged in the mode corresponding to the selected EM61-

MK2 mode in the Survey Setup menu. Log Data screens in logging mode in the text (on the left)

and graphic (on the right) display modes are presented below.

After the screen changes to Logging mode current station (

Stn

 in Text and 

St

 in Graphic display

mode) is updated according to the station interval. Similarly, if  GPS Input was enabled,  total

number of  GPS positions in the data file is incremented every time (usually once a second) GPS

position is written to the file. If  the Graphic display mode is enabled profiles (or profile) curves are

updated after each reading is written to the data file. The audible click sounds at each reading if

Sound option was enabled in the Setup Logger menu.

There is only one option available in the Logging mode - pause logging. After a Pause key (any key,

Alt+F1, or Ctrl+F5) selected in Logger Setup menu is pressed the recording is stopped and the

Log Data menu returns to the Stand By mode. The EM61-MK2 data will be displayed with the

update rate approximately 10 readings per second, however data will not be saved in the log file,

audible click will stop if  Sound option was enabled, and if  graphic mode is used, profile curves will

be not updated.

Exit from the logging session and access to field options are available only from the Log Data

menu in the Stand By mode.

Содержание EM61MK2A































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды