TrueView 435 Hardware User Guide
8
TrueView 435 Hardware User Guide
10/26/2021
Figure 7
–
Prepare for mounting
3.
Apply Loctite to the four Set Screws and install in the empty screw spaces from
Step 2
using a
1.5mm hex driver (Figure 8).
WARNING
- Do not overtighten. If screws are too tight, they will
press into the plastic plate below and could cause the plate to crack.
Figure 8
–
Install set screws
4.
Install the four 50mm spacers on top of the set screws (Figure 9).
