TrueView 435 Hardware User Guide
9
TrueView 435 Hardware User Guide
10/26/2021
Figure 9
–
Install spacers
5.
Line the plate up on top of the spacers. Apply Loctite to the four screws removed in
Step 2
(Figure 10) and secure the plate to the top of the spacers (Figure 11).
Figure 10
–
Loctite the removed screws
Figure 11
–
Install the controller box
6.
Install the controller box on to the top plate with the LEDs facing out away from the center of
the drone. The controller box is designed to fit into the antenna mounting plate without the
need for additional hardware.