TrueView 435 Hardware User Guide
46
TrueView 435 Hardware User Guide
10/26/2021
2.
Remove the dust cover by placing the thumb on the thumb indentation (Figure 60) of the dust
cover, apply upward pressure, then lift out to remove.
Figure 60
3.
Remove the old filter from the dust cover.
4.
Replace the old filter with a new filter (Figure 61).
a.
It is advised to replace this filter with a new filter, but it can be washed and used again if
you are in immediate need. Be sure it is completely dry before re-installing.
Do not use
a wet filter or moisture could be pulled in by the fan and cause damage to the
processors.
Figure 61
5.
Re-Install the dust cover.
