G406S User Guide Document: G406S-2
------------------------------------------------------------------------------------------------------------------------------------------------
8
UHDWall Manager PC tool is also provided to control each GeoBox independently through USB
or Ethernet connection.
If user connects PC to the same Router and set Router with DHCP mode, PC can access to
GeoBox directly. If PC is not connected with the same Router, user needs to set PC with the
same Domain Segment as GeoBox for Ethernet connection.
6 Step 6 - Input Source / Output Resolution selection & LED Indicators
G406s has only one HDMI input port. System default input is HDMI. No need to change.
The output resolution selection will apply to two output channels at the same time.
Output resolution list: 1920x1200, 1920x1080, 1280x720, 1360x768, 1280x800, 1024x768, 1080p@50,
1080p@30, 1080p@24, Deep Color on/off.
User can select output resolution by remote controller. When press [OTH] key, the image will blink and
switch resolution among 1920x1200, 1280x720 and 1360x768 continuously. Please confirm the final
result by INFO key on top of remote controller.
If Monitor is connected,
Green LED will light up
If Input Source is
connected, Green
LED will light up
Channel selection
Output resolution selection
Input Source selection
Default is HDMI input, no
need to change
RC-400
Power LED indicator.
Red: power connected and need to
open by remote controller, Green:
Power on,
Flashing: OSD Lock