
G406S User Guide Document: G406S-2
------------------------------------------------------------------------------------------------------------------------------------------------
16
9.3
Square Asymmetric Video Wall Setup Procedures
User can use two G406s for square asymmetric video wall. Source signal should be applied to two
G406s through loop out port by daisy chain connection. No special connection sequence is
required. The LCD can be installed at landscape or portrait direction.
After decrease TV1
[Overlap] value at Top
Edge
After decrease TV2
[Overlap] value at Right
Edge
After decrease TV4
[Overlap] value at Bottom
Edge, then it is finished.
After decrease TV3
[Overlap] value at Left
Edge
Complete setup
is finished.