13
Interchangeable Tables
The lower table on the machine is interchangeable. Different
sized optional tables can be obtained for various materials & handling
requirements.
The tables simply fit right
onto the table support. The sides
of the angle brackets on the
underside of the table will slide
along the sides of the square
tubing of the table support. Make
sure the small bar strip falls inside
the table support tubing.
Maintenance
The majority of the press has been designed to be as maintenance
free as possible. There are only a few aspects of the machine that
should be monitored to insure proper operation.
•
The clamp/linkage assembly is the greatest area of wear and friction
on the press. The posts that connect to the heat platen should be
lubricated with SuperLube - a clear high-temperature lubricant. Do
not
use grease, white lithium, or WD-40 to lubricate the clamp/linkage
assembly.
•
Check the cord regularly to make sure there are no visible signs of
damage. Make sure the modular cord does not come in contact with
the heater. The modular cord should travel from under the head back
away from the machine.
•
The silicone pad on the lower table can degrade after much use and
over an extended period of time. This pad is replaceable. If the pad
becomes dried out, cracked, or there are chunks removed from the
silicone pad, this can result in inconsistent and poor quality transfers.
