Geo Cruiser Owner’s Manual V1.3
Page 26
VI. Riding the Geo Cruiser
RIDING THE GEO CRUISER FOR THE FIRST TIME
Before riding your Geo Cruiser for the first time, make sure to check the following:
• Make sure the joystick controller is properly connected and locked into place.
• Make sure the rear battery cable is properly connected
• Make sure the Geo Cruiser is powered “OFF” before boarding the unit. If it is “ON” you
may accidently touch the throttle when boarding leading to the Geo Cruising moving
while boarding. This could lead to an accident.
• When you are onboard make sure your feet are safely on the footrest.
• Secure yourself to the Geo Cruiser using the provided seat belt
Get familiar with the controls and joystick controller:
• Drive slowly until you get comfortable with the speed control.
• Practice going forward and reverse.
• Practice turning and making a complete 180° turn.
• Get use to stopping. The brakes are regenerative brakes, meaning that the brakes are
activated when you position the joystick to the default position. This means you either
take your hand off the joystick, or stop the forward or reverse motion.
• Proactive cornering. You want to make sure you drive around corners at a safe speed to
avoid the possibility of accidently tipping.
STREET USE
In most states, power chairs are not legal for use on public roads. Be alert to the danger of
motor vehicles on roads or in parking lots.
• At night, or when it is hard to see, use reflective tape on your Geo Cruise or purchase
the optional Geo Cruiser LED front and rear lights. You can also wear clothing that has
reflective material.
• It may be hard for drivers to see you. Make eye contact with drivers before you proceed.
When in doubt, yield until you are sure it is safe.
