Geo Cruiser Owner’s Manual V1.3
Page 17
III. Unfolding the Geo Cruiser
1.
Pull the footrest forward while pulling the back of
the chair outward. Continue until the chair fully
folds out.
2.
Pull the “Lock/Unlock” cable under seat to lock
the unit into place.
.
3.
Pull the rear seat backrest up until it is in the
vertical lock position.
4.
Position the seat cushion into place with the
zipper oriented in the rear, and the Velcro tape
on each side locked into place so the seat
secure.
5.
Install the backrest as shown. Lock into place with
the Velcro on both sides.
6.
The backrest should look like this once when
installed properly.
