4
Car-navigation unit Installation
1. Connect the USB, GPS antenna, and +B/ACC connectors to
the car-navigation unit.
2. Press the clips (4 locations) shown in the figure and install the
car-navigation unit to the lower panel.
GPS CONNECTOR INSTALLATION (For US/CANADA)
GPS connector installation
1.
Disconnect the connector from the bluetooth unit and connect it
to the connector shown in the figure.
x
Be careful not to press the car-navigation unit when
installing it.
CAUTION
USB connector
+B/ACC
connector
GPS antenna
connector
Car-navigation
unit
Clips
Clips
Car-navigation unit
Lower panel
Clips
Clips
Bluetooth unit
GPS
connector
Bluetooth unit
Lower panel
Vehicle front
Vehicle front
Steering shaft
Steering shaft
x
When switching the connector, if the GPS connector
harness is secured with blue colored tape, peel off the blue
colored tape and install the connector.
CAUTION
