2
ۂ
PARTS LIST
x
TKY2 79 EZX (US/CANADA), TKY3 79 EZX (MEXICO)
Part
Part name
Qty.
Part
Part name
Qty.
Part
Part name
Qty.
Car-navigation
unit
1
Installation
instruction
1
Owner’s
manual
1
ۂ
REQUIRED TOOLS
ۼ
Phillips screwdriver
ۼ
Torque wrench
ۼ
Tape-wrapped flathead screwdriver
ۼ
Socket wrench (10mm) or Spanner wrench (10mm)
ۼ
Clean rag (soft cloth)
1. PARTS
x
Before installation, verify that the kit includes all the following parts and that they are free of dirt, scratches,
or damage.
NOTE:
2. BEFORE INSTALLATION
x
To prevent short related accidents while performing procedures, disconnect the negative battery cable
before beginning any work.
x
When disconnecting the connector, hold the connector itself to remove while pressing the connector lock.
x
Do not apply excessive force to the wiring harness as it could cause an open circuit.
x
When locking connectors, listen for a click that will indicate they are securely locked.
x
Be careful not to pinch the wiring harness. Otherwise, the harness may be broken.
WARNING
x
Refer to the applicable Workshop Manual for removal and installation of vehicle parts. Not following the
procedures for removal/installation in the Workshop Manual could result in an accident or vehicle
malfunction.
x
When the negative battery cable is removed, the clock, radio, trip meters and other memories will be
erased. Before performing work, record the content of the memory.
NOTE:
x
When removing and installing vehicle parts, make sure they are clean with no scratches. Also, be sure to
cover the vehicle body with protectors or mats when removing/installing parts to prevent scratches and dirt.
CAUTION
NOTE: Requires factory installed 5.8” display. Not needed on vehicles with the
Technology Package (they already have factory navigation). All parts are the
same as OE (including SD card KD37-66-EZ1).
