REFLASH PROCEDURE
1. Turn the ignition OFF.
NOTE:
For customer vehicles, verify that the navigation system software is not the latest. See TomTom
Software Version Verification Procedure.
2. Open the sliding door of the navigation control unit and remove the customer’s MAP SD card. Insert the
update SD card and close the sliding door.
3. Turn the ignition ON and wait for the audio system to turn on.
4. Press the “NAV” button to switch to the navigation screen.
NOTE:
It will take up to 1 minute to show the software update screen. First the hour glass appears, then
you can select the “check mark” or wait 5 seconds and the software loading will start (progress bar
is filled from 0%-100%).
CAUTION:
DO NOT remove the SD card or turn the ignition OFF during software loading.
5. After the completion of the software update, the system will reboot and show a screen that says “No map
data found.” Turn the ignition OFF and remove the update SD card. The software update is complete.
6. Insert the customer’s MAP SD card and turn the ignition ON.
