Gentex HGU-55/P Скачать руководство пользователя страница 36

Страница: 36 / 70

Chapter 3: Helmet Maintenance

Procedure

Clean the helmet as follows:

1. Helmet shell: Clean with mild detergent and clean cloth; for stains, use a soft-scrub type of

detergent or equivalent. Do not use waxes or solvents as they may deteriorate the paint or

damage the helmet.

2. Cable and connector: Wipe with damp cloth; dry thoroughly.

3. Visors: Clean with a soft cloth and a mild soap solution; rinse with clean water, OR use a

clean, lint-free cloth dampened with a 70 percent solution of isopropyl alcohol. You may

also use a chamois.

4. Chin strap and nape strap webbing: Wipe with a clean cloth dampened with a mild soap

solution; allow to dry thoroughly.

5. Leather components (edge roll, earpad, chin pad, nape pad): Apply a small amount of

saddle soap with a damp sponge. Rub vigorously to generate a thin soap film. Wipe with a

clean cloth and allow to dry overnight.

6. TPL or SCL: Do the following:

a. Remove the TPL or SCL from the helmet.

b. Referring to

Figure 3-1

, note the manner in which the cloth cover is installed on the

plastic layers. (The holes in the plastic layers and the label on the cloth cover are

at the same end.) Fold the sides of the cover down, and remove the cover from the

plastic layers.

c. Hand-wash the cover with mild detergent only, and allow it to dry.

d. Referring to

Figure 3-1

, place the plastic layers over the clean, dry cover, ensuring that

the cover will be installed properly (not backwards). Fold the sides of the cloth cover

over the plastic layers.

e. Referring to

Figure 3-2

, reinstall the TPL or SCL into the helmet.

7. XLiner: Remove from the helmet; gently hand-wash with mild detergent; rinse thoroughly

and allow to dry flat. Do not place in dryer. Do not wring. Do not use bleach or machine

detergents. Reinstall the XLiner into the helmet as described in TP0265.

Visors have an abrasion-resistant coating, but they can still be scratched with improper

handling. Handle the visors with care.

CAUTION

Содержание HGU-55/P







































































Результаты поиска

Содержание HGU-55/P

Отзывы:

Похожие инструкции для HGU-55/P

Бренды по названию

Популярные бренды

Gentex HGU-55/P, Инструкция по эксплуатации и техническому обслуживанию с иллюстрированным перечнем деталей

Результаты поиска

Содержание HGU-55/P

Отзывы:

Похожие инструкции для HGU-55/P

Бренды по названию

Популярные бренды