Rev A
Instructions
Procedure
Part No. 1258800
Software Update
11
TCON Software Update
Note: Before installation, go to your computers
Control Panel
and increase your computers time
out period to more than 30 minutes.
1
Open the ground control box and set the
fasteners aside.
2
Connect the computer DB9 cable to the TCON
PCB.
3
At the TCON, turn the key switch to ground
controls and pull out the red Emergency Stop
button.
4
Open WebGPI™ and click on the
Connect
icon.
Note: The current application software file will be
shown at the top of the screen. (example:
S0675100 for older software)
Note: If
Check power and serial connection
is
displayed, confirm power is on at the TCON and
check the connection between the computer and
TCON.
Note: If
Attempting to establish connection
is
displayed, check your serial port COM settings.
The COM port settings can vary between
computers.
5
Click on the
Download
icon.
