Genie S-80 XC, Руководство оператора

Страница: 36 / 73

Operator's Manual First Edition • Second Printing
Inspections
34 S
®
-80 XC
™
• S
®
-85 XC
™
Part No. 1279298GT
At the Ground Controls
1 Select a test area that is firm, level and free of
hazards.
2 Turn the key switch to ground control.
3 Pull out the red Emergency Stop button to the
on position.
Result: The beacons (if equipped) should flash.
4 Start the engine. See Operating Instructions
section.
Test Emergency Stop
5 Push in the red Emergency Stop button to the
off position.
Result: The engine should shut off and no
functions should operate.
6 Pull out the red Emergency Stop button to the
on position and restart the engine.
Test Machine Functions
7 Do not push the function
enable button. Attempt to
activate each boom and
platform function button.
Result: No boom and platform functions should
operate.
8 Press and hold the function enable button and
activate each boom and platform function
button.
Result: All boom and platform functions should
operate through a full cycle. The descent alarm
should sound while the boom is lowering.
Test the Tilt Sensor
9 Press the Maintenance button
above the LCD screen. Navigate
to the Real-time Data screen.
Result: The LCD screen should display the
chassis angle and boom angle in degrees.
Test Auxiliary Controls
10 Turn the key switch to ground control and shut
the engine off.
11 Pull out the red Emergency Stop button to the
on position.
12 Simultaneously push the
auxiliary power button and
activate each boom function
button.
Note: To conserve battery power, test each
function through a partial cycle.
Result: All boom functions should operate.
13 Turn the key switch to platform control.