Genie LCM16-IP, Руководство пользователя

Страница: 26 / 32

!
ON Configurable, writable
DIP 2
OFF Normal
ON Force the IP of converter to default IP 10.1.1.10
!
DIP 3
OFF External watchdog invalid
ON
External watchdog is valid, recommended (more
stable)
DIP 4
OFF Normal
ON Reset the converter
DIP 5
OFF Set visitor time / 60 seconds
ON Set visitor time / 120 seconds
DIP 6-7 Reserved
DIP8
OFF FPU8104
ON shidean floor protocol
The time setting on sw5 is the total time from the start of the visitor to the elevator. It is 60
seconds when it is OFF, and 120 seconds when it is set to ON. It is based on the distance between
the gate and the elevator.
The SW8 of the FSC8105 is set to ON, the rest is set to OFF (as shown in the figure below),
At this time, the shidean protocol is used
_'
!
l Switch
The FPU8105 detects the leveling signal of the first floor. If the elevator is on the first floor,
the corresponding LED will light up.
Figure 5-3 first floor signal
l Communication
a) 4-channel 485 input
Following picture is wiring diagram between FSC8105 elevator group controller board and