ii
Intro Section
CAUTION:
•
During transport and installation process, prevent weight, severe vibration and water
damage to the product.
•
Please do not disassemble the zoom camera.
•
For power supply cable, video cable and control cable, please adopt shielded cable
and independent wiring and do not mix with other cables.
•
Please follow all kinds of electric standards when using the PTZ camera and make
sure that the signal cable is kept at enough distance (at least 50m) with high voltage
equipment or cables. If possible, please take lightning and surge measurement.
•
When cleaning the camera housing, please use a dry soft cloth to wipe. If it is too dirty,
please use a neutral cleaner to wipe lightly. Do not use a strong cleaner and scrub
otherwise housing can scratch.
•
Prevent liquid or other things getting into the housing to prevent any damage.
•
Please do not use the camera beyond its limited temperature and humidity : -25°C to
50°C, humidity less than 90%.
•
Please do not install the camera near an air conditioner outlet or any of the following as
the lens will be fogged because of condensation:
- Under the environment where the temperature is up and down frequently.
- In an environment which can make the glass fog.
- In an environment full with smoke or dust.
•
Please do not place the camera towards a strong light source, such as the sun for a
long time as this will damage the colour filter on CCD or CMOS which will make the
image lose colour.
