User Manual
1080p AHD 18x Optical Zoom External 360° PTZ Camera with Wall Bracket
7
Step 3 - Unscrew the 2pcs screws used to fix
the ransparent cover for DIP switch
Use the screwdriver to open 2pcs screw which
are used to fix the transparent cover for DIP
switch, then move transparent cover from
speed dome camera.
Step 4 - Set up DIP switch
Please refer to section 3, Baud rate setup.
Step 5 - Install transparent cover of DIP switch
After finishing baud rate setup, install
transparent cover of DIP switch again.
Step 6 - Lead cable through wall mount bracket
Lead the cable through the wall mount bracket hole.
Step 7 - Connect PTZ camera and wall mount bracket
Put PTZ camera connection port into bracket hole, screw 4pcs hexagon
screws into corresponding screw holes.
M4 Screws
M4 Screws
