
24
Genie AWP Super Series
Part No. 37168
Operator’s Manual
First Edition • Ninth Printing
OPERATING INSTRUCTIONS
Winching the Machine onto a
Flatbed Truck
1 Fully lower the platform.
2 Push in the red Emergency Stop buttons, turn
the key switch to the
OFF
position and remove
the key.
3 Remove the outriggers from the base and place
them in the storage sockets.
4 Inspect the entire machine for loose or
unsecured items.
5 Connect the cable to the winching point located
at the rear of the base.
6 Carefully winch the machine onto the truck.
7
Secure the machine base and mast to the
transport vehicle. Use chains or straps of ample
load capacity.
Loading the Machine With
a Crane
Use the lifting eye mounted on the rear mast
column.
The battery pack must be removed before lifting the
machine with a crane.
Be sure to inspect the machine and remove any
loose or unsecured items.
Always place the lifting hook
through the lifting eye so that
it points away from the
machine.