manualshive.com logo in svg

Genie AWP-15S, Руководство оператора, Страница: 13 / 37

Поделиться
Скачать
Genie AWP-15S Скачать руководство пользователя страница 13

Part No. 37168

Genie AWP Super Series

11

Operator’s Manual

First Edition • Ninth Printing

PRE-OPERATION INSPECTION

Pre-operation Inspection

Be sure that the operator’s, safety and

responsibilities manuals are complete, legible
and in the storage container located on the
platform.

Be sure that all decals are legible and in place.

See Decals section.

Check for battery fluid leaks and proper fluid

level. Add distilled water if needed. See
Maintenance section.

AC & DC models: Check for hydraulic oil leaks

and proper oil level. Add oil if needed. See
Maintenance section.

RT base models: Check for proper tire pressure.

Add air to tires if needed. See Maintenance
section.

Air models: Check the oil level of the airline

lubricator. See Maintenance section.

Air models: Check the oil lubricator canister drip

rate. Adjust as needed. See Maintenance
section.

Air models: Check the air filter/regulator

canister. Drain water as needed. See
Maintenance section.

Check the following components or areas for
damage, modifications and improperly installed or
missing parts:

Electrical components, wiring and
electrical cables

AC & DC models: Hydraulic power unit,
hoses, fittings and cylinder

Air models: Air power unit, airlines, fittings
and cylinder

Platform entry mid-rail or gate

Sequencing cables and pulleys

Lifting chains and idler wheels

Nuts, bolts and other fasteners

Mast columns and counterweight

Breather cap

Outriggers, leveling jacks and footpads

Adjustable glide pads

Check entire machine for:

Dents or damage

Corrosion or oxidation

Cracks in welds or structural components

Inspect and clean battery terminals and all

battery cable connections.

Be sure that all structural and other critical

components are present and all associated
fasteners and pins are in place and properly
tightened.

Содержание AWP-15S






































Отзывы:

Нет отзывов