The yellow WAN-port LED will light up to indicate that an appropriate optical signal is present
on the fiber carrying the optical ethernet signal. In case the optical CATV receiver is installed
and connected the yellow RTV-port LED will light up as well.
6. Closing the module
Close the module by (re)placing the white cover onto the baseplate following the installation
instructions for the housing.
Figure 2
Figure 3
Mounting of CATV module
Mounting of OCG-16m data/voice module
Figure 4
Detail of fixation OCG-16m data/voice module
Nov 2005, Genexis B.V., Lodewijkstraat 1A, 5652 AC Eindhoven, The Netherlands, www.genexis.nl
Genexis
Genexis
OCG-16m fixation pin
Right hand
fiber guiding stub
OCG-16m
fixation pin
hole
Fiber
guiding
stubs
Cover
screw
hole
Sliding
guides
