Important notes:
•
Genexis does not assume responsibility for products that are not handled according to the
instructions contained in this user manual.
•
Any claim for warranty or repair will be void when:
•
Opening the OCG-16m data/voice module or the OCG-12m CATV module.
•
An attempt is made to modify, retrieve or reverse-engineer the software contained in
the OCG-16m data/voice module.
•
For the software, contained in the OCG-16m data/voice module, the OCG-16m software
license agreement is applicable; a copy of this license agreement is available upon request.
3. Module user specification
General
•
Power supply:
12 V DC nominal, 14.4 V DC max
•
Power dissipation:
7 Watt typical, 15 Watt max
•
Operating conditions:
0 – 35 °C
•
Storage conditions:
0 – 70 °C
OCG-16m user telephone interface (RJ-11)
•
2x RJ-11 connectors
•
2x analog POTS line, each supporting 5 REN
•
SIP based Voice-over-IP (rfc 3261)
•
Speech codec G.711 (uncompressed)
•
Standard Fax (G3) supported
OCG-16m user data interface (RJ-45)
•
4x 10/100Base-TX (IEEE 802.3 Ethernet) RJ-45 connectors
•
Full/half duplex
•
Auto-negotiating
•
Auto-MDI/MDIX
•
Range 100 meters
OCG-12m user interface (F-connector)
•
1x F-female connector (IEC 169-24)
•
RF frequency range 47 - 862 MHz
Nov 2005, Genexis B.V., Lodewijkstraat 1A, 5652 AC Eindhoven, The Netherlands, www.genexis.nl
Genexis
Genexis
