Genevac HT-24
User Manual
28
10-1562 Issue 3-7 March
2014
Run log
The
Run Log
screen allows sample drying progress to be monitored during the evaporation
process; information is presented numerically with relevant data also presented graphically
to reveal change trends in real time.
Numerical values are shown for:
Channel 1 Temperature:
SampleGuard
channel 1 probe
Channel 2 Temperature:
SampleGuard
channel 2 probe
Chamber Temperature:
temperature of vacuum chamber wall
Condenser Gas Temperature
: temperature of the condenser coolant gas
Pressure:
vacuum chamber (and condenser) pressure
Spin Rate:
rotor speed
Total:
time elapsed since run started, including completed linked stages
This Stage
: time elapsed since start of current stage, changes to
End of Run
or
End of
Stage
and begins to count down when final run time is known.
Graphical display for:
Channel 1 Temperature
Channel 2 Temperature
Chamber Pressure:
Logarithmic scale
Spin rate
Options menu
Select
OPTIONS
from the horizontal menu bar, the following options appear:
Lamp Layer Selection:
disable lamp layers if second or third rotor levels are not used.
Operator Controls:
opens the
Controls Menu:.
o
Keypress Beep On / Off:
turns off the key-press beep response.
o
User Intervention Beeps On / Off:
turns off the user-intervention beep response.
o
End of Run Beeps On / Off:
turns off repeating end of run alarm.
Options:
enable
Auto Shutdown
and
Pre-Run Checklist.
Maintenance:
for engineer use only.
Status:
displays information for fault diagnostics.
File transfer:
transfer methods or log files to USB data key.
Содержание HT-24
Страница 2: ......
