User Manual
Genevac HT-24
10-1562 Issue 3-7 March
2014
19
Advanced Operation
The evaporator holds a library of up to 100 individual methods (or runs) which can be
accessed using the
SELECT RUN
screen. Runs 50 to 99 are pre-set at the factory and are
generic; they are designed to get the system up and running quickly. To optimise the system
for specific applications, new methods can be created. For development purposes, existing
runs can be copied to a new location where they can be edited.
Setting-up a method
The following section describes how to set-up a new method, the process is similar for
overwriting an existing method. Begin by selecting an empty slot from the
SELECT RUN
screen (or select an existing method to be overwritten) then press the
Settings
key to enter
the
Run Data
screen.
A default set of parameters is shown (or existing parameters if overwriting an existing run).
Press the
cursor direction
keys
to move between the displayed run parameters, then press
the return key to open a field for editing.
Enter a new value for the parameter, then press the return key to save and close the field.
Note:
The
HELP
field, at the bottom of the screen, provides instructions whenever user
intervention is required.
Содержание HT-24
Страница 2: ......
