GeneLink
T M
User Guide Ver1.4
l
GeneLink
TM
is a trademark of Genesys Logic, Inc.
l
For more information about products, please visit
www.shinny.com
or Email:
3
6. The Setup Program will install all necessary components for GeneLink
TM
automatically.
7. Setup complete. Then Setup Program will ask you to reboot you computer for updating your
driver configuration.
8. Remove GeneLink
TM
Setup Diskette from your floppy disk drive. Select ‘
Yes, I want to
restart my computer now
’ radio button and click ‘
Finish
’ button to reboot your computer.
After you complete the installation procedures, you’ll find Setup Program has installed
GeneLink
TM
network driver in your computer. It binds TCP/IP, NetBEUI and IPX protocols to
GeneLink
TM
device. Therefore, those computers which connecting to GeneLink
TM
LAN can
communicate with each other in TCP/IP or NetBEUI protocol. One last thing, please
double-check if you define the same name for two or more computers within GeneLink
TM
LAN. If
you do that, name conflict will occur, and your GeneLink
TM
LAN won’t work.
Step 2 - Network Login
When your restart your computer, you will be prompted for a user name and password to login
your network.