GeneLink
T M
User Guide Ver1.4
l
GeneLink
TM
is a trademark of Genesys Logic, Inc.
l
For more information about products, please visit
www.shinny.com
or Email:
2
-
Build up your GeneLink
TM
LAN
The setup procedure is same for each computer if all your computers are connected via
GeneLink
TM
cable only. GeneLink
TM
LAN driver must be installed in each computer of
GeneLink
TM
LAN. The installation procedures are described as follows :
Step 1. Install driver
1. Insert the GeneLink
TM
setup diskette into your floppy disk drive.
2. Run GeneLinkDriver.exe and the welcome dialog box appears.
3. Click ‘
Next
’ button.
4. Choose the destination folder. If you don’t want to install the driver in the default folder, click
‘
Browse
’ button to select another folder. Click ‘
Next
’ button.
5. Select components that you want to install.
Leave ‘GeneLink
TM
Software Router’
unchecked,
then click ‘
Next
’ button.