© 2019 Genesis Attachments, LLC
Genesis GVP 07 35
WIRE CUTTER JAW SET MAINTENANCE
The wire cutting jaw set is solely designed to process
single or multi-strand wires made of non-ferrous metals
such as aluminum or copper.
!
CAUTION
High strength alloys of these metals
may not
be processed with this jaw set. Single strand wires
processed with this jaw set may not be larger than 200 mm (7-7/8 inches) in diameter includ-
ing the insulation. Furthermore, the wires may not be coated with materials having higher tensile
strength or hardness than copper or aluminum. (e.g. steel) Processing of such materials will dam-
age the blades and the entire jaw set.
When cutting multiple wires at once, the circum-
ference of all the wires must be inside the jaw
during the entire cutting cycle.
Contact Genesis or your local Genesis Dealer
before using the wire cutting jaw set in an applica-
tion not described above.
When changing jaw sets be sure the jaws are securely
positioned even when uncoupled from the stick.
!
CAUTION
Never activate the rotation function of the shear without
having the jaw set properly engaged.
!
CAUTION
Do not operate the GVP attachment until the jaw set is
properly installed and the front cylinder pin is inserted
and secured.
!
CAUTION
Always fully extend the cylinder before removing the
Front Cylinder Pin (PN 3500352), otherwise the upper
jaw may suddenly and unexpectedly close.
!
WARNING
Fig. 1
