Genesis GVP 07, Руководство оператора

Страница: 26 / 52

© 2019 Genesis Attachments, LLC Genesis GVP 07
26
BOLT TORQUE SPECIFICATIONS
Genesis typically uses dry torque measurements.
Prior to using the chart below, clean all bolt holes, bolts and nuts to remove dirt, grease and oil.
See the Visual Reference below or Parts Manual to identify bolt type.
Never re-torque bolts that use Loctite. If a bolt becomes loose or damaged after the initial use
when Loctite was applied and the bolt was torqued, the bolt must be replaced.
Never break tightened bolts loose with a torque wrench. Doing so may break the torque wrench or
take it out of calibration.
Torque wrenches should be calibrated on an annual basis.
When using a torque multiplier with a torque wrench, incorrect settings will be multiplied by the
ratio of the torque wrench.
Never use an air wrench on a torque multiplier.
Visual Reference
Wet Torque Values
Hex Head Flat Head
Fastener
Grade
Size x
Pitch
Nm Ft-lb Nm Ft-lb
CL 10.9
M20 x 2.50 458 338 366 270
M24 x 3.00 790 583 632 466
M27 x 3.00 1157 850 926 680
M30 x 3.50 1572 1160 1258 928
8
3/4-10 383 282 306 226
7/8-9 617 455 494 364
1.00-8 916 675 733 540
1.25-7 1847 1362 1478 1090
1.50-12 4067 3000 3254 2400
Apply grease or anti-seize on threads and under bolt
heads
Dry Torque Values
Hex Head Flat Head
Fastener
Grade
Size x
Pitch
Nm Ft-lb Nm Ft-lb
CL 10.9
M8 x 1.25 36 27 29 22
M10 x 1.50 72 53 58 42
M12 x 1.75 125 92 100 74
M14 x 1.50 210 154 168 123
M14 x 2.00 200 148 160 118
M16 x 2.00 313 230 250 184
M20 x 1.50 640 472 512 378
M20 x 2.50 610 450 488 360
M24 x 3.00 1055 778 844 622
M27 x 3.00 1543 1138 1234 910
M30 x 3.50 2095 1545 1676 1236
8
1/2-13 145 107 116 86
1/2-20 163 120 130 96
5/8-11 286 211 229 169
3/4-10 510 376 408 301
7/8-9 822 606 658 485
1.00-8 1220 900 976 720
1.00-14 1345 992 1076 794
1.25-7 2464 1817 1971 1454
1.50-6 4280 3160 3424 2528
L9 1.00-8 1152 850 922 680