Genesis COUPE BK 2010, Руководство пользователя

Страница: 121 / 168

The Automatic Transmission changes the gear position of the transmission utilizing a combination of Clutches and Brakes,
which are controlled by solenoid valves. High&low reverse clutch solenoid valve is controlled by the TCM in response to
signals sent from the inhibitor switch, vehicle speed sensor and accelerator pedal position sensor (throttle position sensor).
Gears will then be shifted to the optimum position.
The PCM/TCM checks the Shift Control Solenoin Valve E control signal by monitoring the feedback signal from the solenoid
valve drive circuit. If an unexpected signal is monitored, (For example, high voltage is detected when low voltage is expected,
or low votage detected when high voltage is expected)
GENESIS COUPE(BK) >2010 > G 2.0 DOHC > Automatic Transmission System > Automatic
Transmission System > P0768 Shift Control Solenoid Valve \'D\' Electrical(High/Low and Reverse
Clutch Solenoid)
Component Location
General Description
DTC Description
DTC Detectiong Condition
Item Detecting Condition Possible Cause
DTC Strategy • Check voltage range(Open, Short)
• Open or short in circuit
• Faulty Pressure Switch 6
• Faulty H&L R/C solenoid valve
• Faulty TCM
Enable Conditions • 10V < Actuator Supply Voltage < 16V
Threshold Value • Hardware IC check
Diagnostic Time • More than 0.2sec
Fail Safe • Locked as 4th gear
Diagnostic Circuit Diagram