Copyright of the European Union is effective (Copyright EU) (c) 2016 GENEREX GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL [email protected] - WEB www.generex.de (This and all other product datasheets are available for download.)
14
Call the menue “Network & Security”. Make the settings for “Local Address”, “Gateway Address”
and “Subnet Mask” (where required also for “DNS-Server”). Apply your settings with the button on the
right buttom side of the menu.
Figure 17:
HTTP- Basic network settings
If a UPS is connected at the SITEMANAGER II/v3 serial COM 1 it is necessary to set some UPS
parameters. Therefore call the menu
“UPS-Model & System” and select from the drop-down menu the
connected UPS model. Apply your settings with the button on the right bottom side of the menu.
Call the menu “Save Configuration” and choose the option of the same name.
Set DIP-Switch 1 to position ON, whereas DIP-Switch 2 stays in position OFF. Remove and insert
the power supply from the SiteManager II/v3 to initiate the reboot process. See the power
LED’s to
verify the reboot process.
Reconnect the Webbrowser with the adapter using the configured IP address. (http://<the
adapter’s IP-address>”). If you don’t get an answer, please observe, that the routing table contains a
route for the SiteManager II/v3 IP address.
The basic settings are now completed and the SITEMANAGER II/v3 is integrated into the network
environment.
