Generalmusic RealPiano RP150, Руководство пользователя

Страница: 36 / 76

32
7 & 8. Effect Editing
Press the PAGE UP button to pass to the Effect Edit function.
The two pages which follow after the Efx. Send function will be different
depending on which Effect has been assigned to the current Preset.
The two Effect Editing functions affect all three sections of the current
Preset, therefore, only one screen for each parameter appears regard-
less of the status of the Single, Layer or Split mode:
7 EFFECT DEPTH
’’’ 4
The following table lists the available Effect Types and the two associated
parameters which can be modified:
For example, the single Preset “GrandPiano” has been programmed to
play with the Chorus Effect.
From the table shown above, you can see that the first parameter
displayed for editing will be “Effect Depth” (the total amount of the
available Chorus).
Modify the first parameter value by using the DATA +/– buttons.
Press the Page Up button to pass to the second parameter, “Effect Rate”:
8 EFFECT RATE
’ 1
Modify the second parameter value by using the DATA +/– buttons.
Effect Type Parameter 1 Parameter 2
1. Chorus Modulation Depth (amount of
modulation) Rate (modulation velocity)
2. Tremolo Modulation Depth Rate
3. Phaser Modulation Depth Rate
4. Flanger Modulation Depth Rate
5. PitchShift Frequency Coarse Tune (coarse tune
in semitone steps) Fine Tune (fine tune of the
frequency in "cents")
6. Delay 1 Delay Delay Time (the time it
takes for a repeat to
occur) Feedback (the number of
repeats heard before effect
fade out)
7. Delay 2 Delay Delay Time (the time it
takes for a repeat to
occur) Feedback (the number of
repeats heard before effect
fade out)
8. ChorusTremo Modulation Depth Rate